Mitsubishi EVO 4-8 with E Throttle

Genuine Plug-In convenience with modern G4X architecture, advanced tuning and motorsport features.

Purpose-built for the Mitsubishi EVO IV to VIII, the EVO8X is designed to fit directly into the factory ECU location using the factory mounts, original wiring loom and connectors. No rewiring, no adapter looms, no compromises. It retains all factory functionality, delivers seamless OEM integration and includes a startup map to get your vehicle running quickly. The result is a clean, simple, reliable installation that maintains a stock appearance.

Link G4X Plug-in ECUs share the same processor, firmware, software and standard G4X feature set found throughout the G4X range. Features include dual CAN Bus, Flex Fuel, Flexible Engine Protection Limiters, CAN Keypad Control, Open and Closed Loop Boost Control, Dual Closed Loop Lambda, VVT Control, a built-in Trigger Oscilloscope, compatibility with aftermarket displays, Direct Automatic Transmission Control and 512MB of onboard data logging. It also features a built-in MAP sensor.

Drawing from Link's championship-winning G4X platform, the EVO8X also supports advanced tuning and motorsport features including Nitrous Control, Launch Control, Anti-lag, Cruise Control, Traction Control, Race Timer and Power Management, Gear Shift Control and Paddle Shift Control.

A Link Plug-in ECU is the ideal solution when available for your vehicle and the wiring remains in good condition, providing modern engine management without the complexity of a wire-in installation.

Models Supported

The EVO8X is designed to suit the following applications:

Mitsubishi CN9A Lancer Evolution 4

Mitsubishi CP9A Lancer Evolution 5, 6 & 6.5 (TME)

Mitsubishi CT9A Lancer Evolution 7

Mitsubishi CT9A Lancer Evolution 8 (models with 4-plug ECU only)

Mitsubishi Eclipse G2 GS-T from 1994-1999

Important

Please check your connector matches the header in the listed photo before purchasing.

This ECU works for manual transmissions only.

This model includes an onboard MAP sensor.

Most factory features are supported.

This ECU will need an expansion connector before E-Throttle is usable.

(203-4000)

G4X PlugIn Key Features (where applicable):
Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
512 mega bytes data logging memory
Staged injection
Knock with "windowing"

I/O Expansion Options
The following expansion connector inputs/outputs are provided: 
The Mitsubishi Lancer Evolution IV - VIII plug-in ECU has two expansion connectors. 

Expansion connector 1:
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
DI 7                Digital input 
DI 8                Digital input 
DI 9                Digital input 
Aux 4                Auxiliary Output 
Ign 7                Ignition 7 Auxiliary Output 
Ign 8                Ignition 8 Auxiliary Output 

Expansion Connector 2 
Gnd                Sensor Ground Only  
+5V Out        Low Current +5V Supply 
Aux 9                EThrottle - can't be used as an Aux Out 
Aux 10                Auxiliary Output 
An Volt 6        Analog 0-5V input 
An Volt 7        Analog 0-5V input 
An Volt 9        Analog 0-5V input 
An Volt 10        Analog 0-5V input 

Download Manual Click here

Suitable applications:  

Evo 4 | CN9A 

Evo 5, 6 & 6.5 (TME) | CP9A

Evo 7 | CT9A 

Evo 8 (models with 4-plug ECU only) | CT9A

*Some EVO 8’s have a 3 plug ECU. These applications will need the EVO9X Link ECU

SKU 203-4000
Brand Link ECU
Shipping Cubic 0.006000000m3

Be The First To Review This Product!

Help other Possum Bourne Motorsport users shop smarter by writing reviews for products you have purchased.

Write a product review