This OEM Oil Pump has been designed for increased output and increased volume capabilities required for high RPM performance engines, making it perfect race a modified or race focussed engine. 

Factory Subaru engines are known to have oiling issues to the big-end bearings, which this pump can help to prevent. 


Oil Pump features:

  • Genuine Subaru Quality
  • 12mm pump rotor
  • 12mm pump housing
  • Larger oil passages


Oil Pump to suit:

This oil pump can be fitted to any EJ engine during an engine build, or routine maintenance when the cambelt is removed. Engines this pump with fit include:

  • EJ20 / EJ205 / EJ207 / EJ208 / EJ209 / EJ20X / EJ20K / EJ20Y
  • EJ22
  • EJ25 / EJ255 / EJ257
  • The high flow nature of this pump makes it more suitable for a built or modified engine.


Engine build information:

  • This oil pump must be fitted with a new o-ring and front seal
  • It must be fitted to a clean engine free from any debris
  • A replacement oil pump is required when an engine has suffered a big-end bearing failure
  • We recommend priming the oil pump with assembly lubricant or vaseline to ensure ease of building oil pressure upon the first start. This can be achieved by removing the oil pump backing plate, packing it with lubricant, and re-fitting the backing plate.
  • The backing plate screws are known to loosen over time. We recommend using a retaining compound or M6x12mm countersunk cap-screws with a hex when re-assembling after priming. 
  • Additional pressure relief valve washers can be used to further increase the oil pressure of this oil pump.
  • Engine oil supply is critical to engine reliability, thus we highly recommend digital monitoring of the oil pressure to ensure it is suitable for the application. 
  • As this pump can flow up to 20% more than a standard pump, oil control is of even more importance. We recommend using a baffled sump to suit the vehicle this will be installed in. Click here to view options. 


Other oil pump options:

Common oil pumps used in Turbo Subaru engines include 10mm, 11mm and 12mm variations.

  • 10mm is the most common stock pump, found in many Turbo Subaru engines, and is suitable for stock power levels.
  • 11mm is found on STI engines from around 2007 onward and is suitable for stock and mildly modified engines or as an upgrade for the 10mm pump.
  • 12mm is found in selected Spec C models and selected JDM Legacy models that required additional oil flow. These are suitable for engines that will be modified or used in a motorsport application. 


If unsure of the size of your current oil pump, you can measure the thickness of the rotor when disassembling your stock pump.


Brand new Genuine Subaru Oil Pump, made by FHI in Japan.

This 12mm oil pump has the highest flow capacity of any EJ20/EJ25 Oil pump, with the high quality you’d expect from a genuine product. 

These oil pumps have proven reliable in everything from stock vehicles to highly modified race engines. 


SKU 15010AA310
Brand Genuine Subaru
Shipping Weight 2.0000kg
Shipping Width 0.200m
Shipping Height 0.100m
Shipping Length 0.300m
Shipping Cubic 0.006000000m3

Be The First To Review This Product!

Help other Possum Bourne Motorsport users shop smarter by writing reviews for products you have purchased.

Write a product review